P D T
Aligning the Screen
To align your PDT 8100 so the cursor on the touch screen aligns
with the tip of your stylus:
1. If necessary, adjust the contrast on the PDT 8100 so the
screen is readable. See
13.
2. Remove the stylus from its storage silo on the back of the
PDT 8100.
3. Tap the center of each target that appears on the screen with
the tip of the stylus.
4. Follow the directions on the screen which explain how to use
the stylus and pop-up menus, and allow you to set your city
and time zone.
8 1 0 0
Controlling the Backlight on page
Tap the target firmly and
accurately at each location on
the screen. The target will
continue to move until the screen
is aligned.
12
S e r i e s