Mitsubishi 4G1 Service Manual page 380

11 E-96
NOTE
Do not install a valve guide of the same size again.
(4) Using the special tool, press-fit the valve guide, working
from the cylinder head top surface.
(5) After installing valve guides, insert new valves in them to
check for sliding condition.
(6) When valve guides have been replaced, check for valve
contact and correct the valve seats as necessary.
INSTALLATION SERVICE POINTS
VALVE STEM SEAL INSTALLATION
(1) Install the valve spring seat.
(2) Using the special tool, install a new stem seal to the valve
guide.
Caution
Do not reuse removed valve stem seals.
(1) Direct the valve spring end with identification color toward
the spring retainer.
the retainer lock into position.
TSB Revision
SOHC