Mitsubishi 4G1 Service Manual page 135

Camshaft - SOHC
Identification mark: D
Cam height
Exhaust
Identification mark: AR
Cam height Intake
Exhaust
NOTE:
The camshaft identification mark is stamped
on the rear end of the camshaft.
Fuel pump driving cam diameter
Journal diameter
Oil clearance
Camshaft - DOHC
Cam height
dentification mark: B,C,E,F
Cam height
dentification mark: A
Cam height
dentification mark: C
Cam height
dentification mark E,F
Cam height
locker arm - SOHC
locker shaft - SOHC
I.D.
Exhaust
Standard
42.40 (1.6693)
42.40 (1.6693)
44.53 (1.7531)
44.53 (1.7531)
38 (1.50)
33.94 - 33.95 (1.3362 - 1.3366)
0.05 - 0.09 (.0020 - .0035)
35.49 (1.3972)
35.20 (1.3858)
35.20 (1.3858)
35.49 (1.3972)
35.91 (1.3744)
25.95 - 25.97 (1.0217 - 1.0224)
0.05 - 0.09 i.0020 - .0035)
18.91 - 18.93 (.7445- .7453)
0.01 - 0.04 LOO04 - .0016)
4 - 20 seconds/l mm (.04 in.)
18.89 - 18.90 (.7437 - .7441)
372.5 (14.665)
mm (in.)
Limit
41.90 (1.6496)
44.03 (1.7335)
44.03 (1.7335)
34.99 (1.3776)
34.70 (1.3661)
34.70 (1.3661)
34.99 (1.3776)
34.41 (1.3547)