Mitsubishi 4G1 Service Manual page 216

Engine with silent shafts
Engine with silent shafts
Cylinder'
block
(3) Using the special tool, install the rear bearing.
NOTE
The left rear bearing has no oil holes.
SILENT SHAFT FRONT BEARING INSTALLATION
(ENGINE WITH SILENT SHAFTS)
FRONT CASE INSTALLATION
apply a thin coat of engine oil to the outer circumference of
the special tool to install the front case.
(2) Install the front case assembly through a new front case
gasket and temporarily tighten the flange bolts (other than
those for tightening the filter bracket).
TSB Revision
I