Omron 3G3JX User Manual page 123

Parameter Initialization
You can initialize the rewritten set values and reset to the factory default, or clear trip records.
Note that this is not available for RUN and power ON times.
Parameter No. Function name
b084 Initialization selection
Initialization parameter
b085
selection
Initialization Method
After setting the parameter, use the following method to initialize.
(1) Press the STOP/RESET key with the Mode
and Decrement keys pressed simulta-
neously.
Release the STOP/RESET key when the
display blinks.
Release the Mode and Decrement keys.
(2) Initializing
(3) Initialization completes with "d001"
displayed on the monitor.
The multi-function input/output terminals are also initialized with this function. To avoid unexpected
operation, be sure to re-examine the wiring.
Data
00: Clears the trip monitor
01: Initializes data
02: Clears the trip monitor and initializes
data
00: Do not change.
4-2 Function Mode
Default setting
00
00
0k0
dk0k0k1
Unit
⎯
⎯
4
4-38