Euro Migration Function - Sharp XE-A207W Full Detailed Instruction Manual

c
EURO Migration Function
Basically your register can be automatically modified to correspond to the introduction of EURO by executing
the operation "EURO STATUS" in X2/Z2 mode. However, there are several options you must set depending
on your need. So, please carefully conduct necessary settings.
EURO status:
You can select status from following 4 types ((A), (B), (C), or (D)). And the selectable type is decided as
follows for each status. Type (A) is the base status (initial status).
From type (A) ———— selectable
From type (B) ———— selectable
From type (C) ———— selectable
General Z1 report
General Z2 report
GT1/GT2/GT3 memory
Exchange1 amount printing for total and change
Exchange1 calculation method
Domestic currency symbol
Domestic TAB
Conversion of preset prices of Dept./PLU*
Exchange1 currency descriptor
Exchanger1 TAB
The marked items "—" is remaining the current data.
*: The preset rate of the Exchange1 is applied as the conversion rate, and the calculation method is set to
"division". When the conversion has been made, the message "PRICE CONVERTED" is printed on the
report.
Items
Type (B), (C), or (D)
Type (C), (D)
Type (D)
Type (B)
ISSUE
ISSUE
—
YES
DIVISION
—
—
—
[EURO]
currency symbol
2
domestic TAB
119
Type (C) Type (D)
ISSUE ISSUE
ISSUE ISSUE
CLEAR CLEAR
YES
MULTI MULTI
[EURO] [EURO]
2
YES
The current
domestic
The current
NO
2
YES
—
—