Replacing The Paper Roll; Recording Paper Specifications; Installing A Paper Roll - Sharp XE-A207W Full Detailed Instruction Manual

Replacing the Paper Roll
■ Recording paper specifications
Be sure to use paper rolls specified by SHARP.
The use of any other paper rolls than specified could cause paper jamming, resulting in register malfunction.
Paper specification
Paper width:
Max. outside diameter: 80 mm
Quality:
Paper tube:
• Be sure to set a paper roll prior to using your machine, otherwise it may cause a malfunction.
Install the paper roll in the printer. Be careful then to set the roll and cut the paper end correctly.
■ Installing a Paper Roll
Always install the paper roll even when you set the register for not printing receipt in REG mode.
Print roller arm
57.5 ± 0.5 mm
Thermal paper
18 mm
1.
Remove the printer cover.
2.
Lift up the print roller arm.
3.
Set the paper correctly in the paper roll cradle.
NOTE
4.
Feed the end of the paper along with the paper positioning
guides as per the diagram.
Before placing a new paper roll in the paper
roll cradle, cut off the pasted (taped) part of the
paper and confirm that the cut end of the paper is
straight.
124