Zero Skip; Print Select - Sharp XE-A207W Full Detailed Instruction Manual

■ Zero skip
You can program whether or not to skip "0" in each report.
Procedure
• PLU (Use the selective entry)
SKIP: Skips those data that are "0" in the PLU report.
NOT SKIP: Does not skip those data that are "0" in the PLU report.
• CLERK (Use the selective entry)
SKIP: Skips those data that are "0" in the clerk report.
NOT SKIP: Does not skip those data that are "0" in the clerk report.
• HOURLY (Use the selective entry)
SKIP: Skips those data that are "0" in the hourly report.
NOT SKIP: Does not skip those data that are "0" in the hourly report.
■ Print select
You can program whether or not to print the item on the report.
Procedure
The screen continues.
• GT2 ON Z (Use the selective entry)
YES: Print GT2 on the Z report.
NO: Not to print GT2 on the Z report.
• GT3 ON Z (Use the selective entry)
YES: Print GT3 on the Z report.
NO: Not to print GT3 on the Z report.
• BAL GT ON Z (Use the selective entry) for XE-A217W/XE-A217B only
YES: Print the balance GT on the Z report.
NO: Not to print the balance GT on the Z report.
• TR GT ON Z (Use the selective entry)
YES: Print the training GT on the Z report.
NO: Not to print the training GT on the Z report.
Program each item as follows:
• DEPARTMENT (Use the selective entry)
SKIP: Skips those data that are "0" in the department
report.
NOT SKIP: Does not skip those data that are "0" in the
department report.
• TRANSACTION (Use the selective entry)
SKIP: Skips those data that are "0" in the transaction
report.
NOT SKIP: Does not skip those data that are "0" in the
transaction report.
Program each item as follows:
• SEPARATOR LINE
YES: Print the separate line on the report.
NO: Not to print the separate line on the report.
• Z COUNTER (Use the selective entry)
YES: Print the Z counter on the Z report.
NO: Not to print the Z counter on the Z report.
• GT1 ON Z (Use the selective entry)
YES: Print GT1 on the Z report.
NO: Not to print GT1 on the Z report.
97