Euro Migration Function - Sharp UP-800F Instruction Manual

15

EURO Migration Function

Basically your POS terminal can be automatically modified to correspond to the introduction of EURO by
executing the operation "EURO STATUS" in X2/Z2 mode. However, there are several options you must set
depending on your need. So, please carefully conduct necessary settings.
For details, contact your authorized SHARP dealer.
EURO status:
You can select status from following 4 types ((A), (B), (C), or (D)). And the selectable type is decided as
follows for each status. Type (A) is the base status (initial status).
From type (A)
From type (B)
From type (C)
General Z1 report
General Z2 report
GT1/GT2/GT3 memory
Exchange1 amount printing for total and change
Exchange1 amount printing for total validation print
Exchange1 calculation method
Domestic currency symbol
Domestic TAB
Conversion of preset prices of Dept./PLU/EAN*
Exchange1 currency descriptor
Exchanger1 TAB
The marked items "—" is remaining the current data.
*: The preset rate of the
"division". When the conversion has been made, the message "PRICE CONVERTED" is printed on the
report.
224
selectable
selectable
selectable
Items
,
key is applied as the conversion rate, and the calculation method is set to
Type (B), (C), or (D)
Type (C), (D)
Type (D)
Type (B) Type (C)
ISSUE ISSUE
ISSUE ISSUE
— CLEAR
YES YES
YES YES
DIVISION MULTI
— [EURO]
— 2
— YES
The current
[EURO] domestic
currency symbol
The current
2
domestic TAB
Type (D)
ISSUE
ISSUE
CLEAR
NO
NO
MULTI
[EURO]
2
YES
—
—