Attaching The Enclosure - Panasonic WV-SF138 Installation Manual

Attaching the enclosure

Attach the enclosure to the camera with 2 enclosure fixing screws (M3) and the hook.
(Recommended tightening torque: 0.4 N·m {0.3 lbf·ft})
Ceiling
Enclosure fixing screws
Close the screw cover.
Remove the cover film completely.
IMPORTANT:
• When attaching the enclosure the focus may be slightly disturbed. If this occurs, remove the
enclosure and make the necessary adjustments.
• Before attaching the enclosure, make sure that the subject is present.
• Securely tighten all the fixing screws (x2) of enclosure. Otherwise, the camera may malfunction,
or the enclosure may fall, resulting in injury.
(Recommended tightening torque: 0.4 N·m {0.3 lbf·ft})
• Remove the cover film from the dome cover.
24
Wall
Enclosure
fixing screws