Troubleshooting - Panasonic WV-SF138 Installation Manual

Troubleshooting

Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the
table or a problem is not described below.
Symptom
Power is not turned on.
Cause/solution
• Are the PoE device and the network
connector on the rear of the camera
connected using a LAN cable?
 Check whether the connection is
appropriately established.
• Depending on the PoE device, the
power supply will stop when the
demanded power exceeds its total
power limit for all PoE ports.
 Refer to the operating instructions of
the PoE device in use.
Reference
pages
19
27