Attaching The Dome Cover - Panasonic WV-SW155 Installation Manual

Attaching the dome cover

z
Attach the dome cover to the camera by using the tamperproof screw bit (accessory) to tighten
the 3 dome cover fixing screws (M3).
Ceiling
n
Dome cover fixing screws
x
Close the screw cover.
c
Remove the cover film completely.
Important:
• When attaching the dome cover the focus may be slightly disturbed. If this occurs, remove the
dome cover and make the necessary adjustments.
• Before attaching the dome cover, make sure that the subject is present.
• Securely tighten all the fixing screws (x3) of dome cover. Otherwise, water exposure may cause
damage or malfunction of camera, or camera dropping may result in injury.
(Recommended tightening torque: 0.8 N·m {0.59 lbf·ft})
• Remove the cover film from the dome.
Wall
n
Screw cover
Dome cover
fixing screws
31