Navigating The Menus; Help - Runco Video Xtreme VX-40d Owner's Operating Manual

Section 3: Operation
3.3 Navigating the
Menus
Most of the controls for the projector are accessed from within the projector's menu
system. There are several groups of related functions, with each group selectable from the
Main menu as shown at right. Press Menu at any time to display this Main menu.
On the remote keypad, either enter the number corresponding to the function menu you
wish to access, such as 2 for the Image Settings menu, or use the keys on any keypad to
highlight the desired option, then press Enter. The corresponding function menu or pull-
down list of further options will then appear.
With a function menu displayed, navigate in a similar manner—enter a menu option
number for any numbered option, or use the keys to highlight the desired option, then
press (Enter). Extra long menus have a scroll bar on the right—use the arrow keys to
access the remainder of the menu. Locked items or items that do not pertain to the
current action or condition appear dimmed and cannot be selected.
NOTES: 1) If there is no signal present, all source-dependent adjustments are disabled.
2) After 15 minutes of inactivity, the projector leaves the menu system and returns to the
presentation. 3) The Status menu is read-only.
When finished with a function menu, do one of the following:
• Press Exit to return to the previous screen
• Press Menu to leave the menu system and return to the presentation

Help

If at any time you are uncertain what to do next, press Help to display summary information
➤
about the current menu or highlighted option. Press Help again to exit. In addition, a line
of "hint" text is included at the bottom of some menus.
Figure 3.4 Entering the Menu System
34