Runco Video Xtreme VX-40d Owner's Operating Manual page 18

Section 2: Installation and Setup
Mounting
There are several methods for mounting the projector. Depending on your chosen
installation, one method may be more suitable than another. In typical front and rear
screen installations the projector can be mounted to a secure and level surface, such as a
table or cart. Carts are useful when moving a projector during a presentation or from site
to site. If possible, lock the wheels when it's in position to prevent it from being moved
during a presentation.
CEILING MOUNT—The projector can also be inverted and suspended from the ceiling
using a specially designed ceiling mount fixture. This type of mounting is recommended
for fixed installations and for those that want the projector out of sight or have a limited
space for projector and audience.
Use only the Runco approved ceiling mount kit designed for your projector.
SPECIAL MOUNTING—The projector can be rotated (front-to-back) up to 360 degrees
and mounted without it affecting performance. However, the side-to-side tilt limit of
the projector must not exceed ±15 degrees. This tilt limit is required to ensure optimal
performance of the lamp. (Figure 2.6.)
������
�����
Figure 2.6
18