Appendix D - Optional Input Modules; Rgb500 Input Module; Rgb400Ba Input Module - Runco Video Xtreme VX-40d Owner's Operating Manual

APPENDIX D
Optional Input Modules

RGB500 Input Module

RGB400BA Input Module

There are many optional input modules and accessories currently available for this
➤
projector. Contact your dealer for a complete and up-to-date listing.
The RGB500 Input Module may be installed in this projector, a Marquee Signal Switcher,
or a Marquee Case/Power Supply. The module receives analog RGB input signals from
computers or other RGB source devices.
RGB500 Features
• accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or separate
horizontal and vertical sync), up to 500 MHz bandwidth
• accepts YPbPr, composite (on green) and Y/C (on red/blue)
• BNC connectors for RGB signal inputs
NOTE: The audio connectors are not functional.
The RGB400 Buffered Amplifier Input Module may be installed in this projector, in a
➤
Marquee Signal Switcher or in a Marquee Case/Power Supply. Connect three-, four-, or
five-wire RGB video signals of up to 400 MHz bandwidth, signals typically produced by
high-resolution computer or workstations. The buffering capability of the module enables
the incoming signal to be sent to a remote destination. Inputs are 75Ω terminated.
RGB400BA Features
• accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or separate
horizontal and vertical sync)
• accepts YPbPr, composite (on green) and Y/C (on red/blue)
• BNC connectors for RGB signal inputs
• Buffered signals to a remote destination
NOTE: The audio connectors are not functional.
98