The module accepts a serial digital 4:2:2 component video signal (YCbCr) via
a single SERIAL IN BNC connector. The signal can loop through the SERIAL
OUT BNC out to another device (such as another projector). Inputs are 75Ω
terminated.
SDI Features
• accepts serial digital 4:2:2 component video (YCbCr)
• provides both a SERIAL IN and a SERIAL OUT BNC connector includes
status LEDs for signal and error
• SMPTE 259M compatible
The Dual SD/HD-SDI Module enables incoming serial digital (SD or HD) data to
be tiled across multiple screen displays, overlapped for extra-bright displays, or
distributed to additional projectors for multiple, same-image screens.
Dual SD/HD-SDI Features
• Accepts and decodes up to two serial digital inputs
• Outputs up to two 10-bit YCbCr 4:2:2 video signals
• Provides input(s) to output(s) loop-through capability
• Supplies interchangeable inputs as part of the Picture-in Picture display
• SMPTE 259M compatible
101
Appendix D: Optional Input Modules
Serial Digital Input Module
Dual SD/HD-SDI Module