Using The Remote Or Built-In Keypad; Keypad Commands; Built-In; Ir Remote - Runco Video Xtreme VX-40d Owner's Operating Manual

The projector can be controlled using one of the following keypads:
• Built-in Keypad located at the back of the projector

• IR Remote

While each of the keypads provides complete control of the projector, they differ slightly
in their arrangement of keys and in what functions can be accessed directly with a key
press rather than requiring use of the menu system. You may find one keypad more
convenient than another for your specific installation and application.
To control the projector when signals from a remote keypad cannot reach the projector,
use the projector's built-in keypad. The nearby LED display provides feedback indicating
current status and activities of the projector. Because the built-in keypad has fewer keys
than the remote keypad, certain projector functions are accessible only through the menu
system rather than via a direct key.
Figure 3.2 Built-in Keypad
Refer to the key descriptions provided for the IR remote – see Figure 3.3.
The IR remote keypad controls the projector by way of wireless communications from a
battery-powered infrared (IR) transmitter. Use the IR remote keypad the same way you
would use a remote keypad supplied with a TV or VCR. When making key presses, direct
the keypad toward the front or top of the projector. One of the two IR sensors on the
projector will detect the signals and relay the commands for internal processing.
27
Section 3: Operation
3.2 Using the Remote
or Built-in Keypad

Keypad Commands

Built-in

IR Remote