Selecting Input Source - Runco Reflection CL-410 Owner's Operating Manual

Basic Operation

Selecting Input Source

1 Press one of the source buttons on the remote control, such as VIDEO, to select
an input source, or move through input sources using the
on the remote control.
Note:
• When a signal is not received,
"Searching" is displayed.
About the source input modes
Video Use this option to select
the composite video
input source.
Component Use this option to select
1 and 2 a YPbPr, SDTV, or
HDTV component input
source.
RGB HD Use this option to select
RGB HD input source
(computer input).
S-Video Use this option to
select the S-Video input
source.
DVI Use this option to select
the DVI input source.
Note:
You can choose either manual or automatic
source detection. For more information on
setting manual or automatic detection, see
"Source Detect" on page 42.
2 Press the OFF button on the remote control to turn off the projector, when the
confirmation message is displayed.
Note:
• Do not unplug the power cord during projection or
cooling fan operation. This can cause damage due
to the rise in internal temperature, as the cooling fan
also stops.
• If you accidentally press the power (ON) button
and do not want to turn off the projector, press the
EXIT button or wait until the confirmation message
disappears.
26
left and right buttons