Raymarine a67 Wi-Fi Installation And Operation Instructions Manual page 286

NMEA Set-up menu
This menu enables you to configure settings for NMEA devices.
Menu item
Bridge NMEA Heading
NMEA Output Settings
NMEA Input Port 1
NMEA Input Port 2
286
Description
If set to ON, NMEA heading data will be bridged onto the
SeaTalk data bus, and will be sent to all NMEA-connected
devices. If set to OFF, NMEA heading data will NOT be
bridged onto the SeaTalk bus. An example of a use for this
setting is when using MARPA with an external fast heading
sensor, in which case you should set this option to OFF to
ensure that all NMEA-connected units receive heading data
from the external heading sensor.
Allows you to enable or disable the individual NMEA
"sentences" that are sent by the multifunction display to any
devices connected the NMEA output port.
Enables you to specify the appropriate port speed for the
equipment connected to NMEA Input port 1. Use the AIS
38400 option for AIS receivers.
Enables you to specify the appropriate port speed for the
equipment connected to NMEA Input port 2. Use the AIS
38400 option for AIS receivers.
Options
• On
• Off (default)
• APB
• BWC
• BWR
• DBT
• DPT
• GGA
• GLL
• GSA
• GSV
• MTW
• MWV
• RMA
• RMB
• RMC
• RSD
• RTE
• TTM
• VHW
• VLW
• VTG
• WPL
• ZDA
• NMEA 4800
• AIS 38400
• NMEA 4800
• AIS 38400
New a Series / New c Series / New e Series