Raymarine a67 Wi-Fi Installation And Operation Instructions Manual page 212

7. Select the data item you want to display.
Once selected a tick will be placed next to the data item in
the menu and the cell on screen will display the selected
data item.
8. Repeat steps 3 to 6 for all the data items you want to change.
9. Select Rename Page.
The on screen keyboard is displayed.
10. Enter the new name for the datapage.
11. Select SAVE.
Deleting a datapage
You can delete custom or pre-configured datapages from the
data application. The minimum number of datapages allowed
is 1.
From the data application:
1. Scroll to the datapage you want to delete.
2. Select Menu.
3. Select Delete Page.
The confirm delete pop up message is displayed.
4. Select Yes to delete the datapage, or No to cancel the action.
Note: You cannot create a new engine page with the same
layout as the pre-configured engine datapages.
Setting number of engines
You can set the number of engines your vessel has up to a
maximum of 5.
From the data application:
1. Select Menu.
2. Select Num. Of Engines.
3. Select either 1, 2, 3, 4 or 5.
Once selected, a tick will be placed next to the item in the
menu and the engine datapage will be reset to display the
correct number of engines.
Engine datapages
Depending on the number of engines you choose you will see
one of the following datapages:
1 Engine
2 Engines
3 Engines
212
4 Engines
5 Engines
Note: The default number of engines is determined by the
vessel type selected during the initial start up wizard, if a sail
boat is chosen then default is 1 engine for motor boats default
is 2 engines.
Setting maximum engine RPM
You can set the maximum RPM range to display on the RPM
data item.
From the data application:
1. Select Menu.
2. Select Max RPM Range.
A list of available RPM settings is displayed.
3. Select the required RPM range.
A tick will be placed next to the selected RPM range in the
menu and the RPM range on the engine datapage will be
changed to your new setting.
Example
1
1
2
Note: *The maximum RPM when in auto mode is set by the
engine.
Changing color theme and dial colors
You can change both the color theme and the dial color.
From the data application:
1. Select Menu.
2. Select Presentation.
3. Select Color Theme.
Selecting color theme will switch color between Light and
Dark.
4. Select Dial Color.
Selecting dial color will switch the color between Light and
Dark.
2
Auto*
10,000 RPM
New a Series / New c Series / New e Series