Raymarine a67 Wi-Fi Installation And Operation Instructions Manual page 135

• From a selected waypoint or any leg within a route.
You can also follow any route in reverse order.
Following a stored route
From the chart application:
1. Select Menu.
2. Select Navigate.
3. Select Follow Route.
The Route list is displayed.
4. Select the route you want to follow.
5. Select Follow Route.
Cancelling navigation of a route
From the chart application:
1. Select the Route.
The route context menu is displayed.
2. Select Stop Follow.
Arriving at a waypoint
As your vessel approaches a waypoint, the waypoint arrival
alarm provides a warning.
1. Select Ok on the waypoint arrival alarm pop up message.
Once the alarm is acknowledged, the next waypoint is selected,
and the display updates to indicate the next leg of the route.
Note: You can set the approach distance (radius) at which the
waypoint arrival alarm will sound using the Alarms menu from
the homescreen: Set-up > Alarms > Waypoint Arrival.
Advancing to the next waypoint in a route
You can skip the current active waypoint and advance to the
next waypoint in a route at any time.
While following a route in the chart application:
1. Select the route.
The route context menu is displayed.
2. Select Advance Waypoint.
Note: If the current destination is the last waypoint, the chart
advances on to the first waypoint in the route.
Cross Track Error (XTE)
Cross Track Error (XTE) is the amount of deviation from your
intended route or waypoint, expressed as a distance.
In the event that you steer off-track, you can go straight to your
target by resetting XTE.
Resetting Cross Track Error (XTE)
While following a route in the chart application:
1. Select the route.
The route context menu is displayed.
2. Select Restart XTE.
Resetting XTE results in a new course from the current vessel
position to the current target waypoint. This does not affect
your saved route.
Waypoints, Routes and Tracks
XTE
You can also reset the XTE from the Navigate Menu: Menu >
Navigate > Restart XTE.
Following a route in reverse order
From the chart application:
1. Select the route.
The route context menu is displayed.
2. Select Follow Route In Reverse.
You can also select Follow Route In Reverse by selecting a
route from the route list: Menu > Navigate > Follow Route.
Review or edit a route
There are a variety of attributes associated with routes. These
can be reviewed and edited.
You can:
• Show or hide a route on the chart screen.
• Review details of the route
• Change the name or color of a route.
• Add, move and remove waypoints from a route.
• Change the route lines width.
Note: An active route can be edited, with the exception of the
active waypoint. If a waypoint being edited becomes active,
then the system shall cancel the edit; the waypoint shall
remain in its original position.
Showing or hiding a route
From the chart application:
1. Select Menu.
2. Select My Data.
3. Select Display My Data.
4. Select Select Routes To Display.
The display routes dialog is displayed.
5. Select the route to switch between Show and Hide.
Selecting a route to review or edit
1. Do one of the following to select the required route:
• With the chart application active, select a route on screen
to display the route context menu.
• With the chart application active, select: Menu > My Data
> Route List and select the required route from the list.
• From the homescreen, select: My Data > Route List and
select the required route from the list.
Adding a waypoint to a route on the chart screen
D11765-2
From the chart application:
1. Select the appropriate leg of the route.
The route context menu is displayed.
2. Select Insert Waypoint.
3. Select the location for the new waypoint.
The leg of the route is stretched to include the new waypoint.
Removing a waypoint from a route
From the chart application:
1. Select the waypoint you want to erase.
The waypoint context menu is displayed.
2. Select Erase Waypoint.
The erase waypoint pop up message is displayed.
3. Select Yes to confirm or No to cancel the action.
D12295-1
135