Chart Views - Raymarine a67 Wi-Fi Installation And Operation Instructions Manual

15.4 Chart views

Switching between 2D/3D chart view
You can switch between 2D and 3D views.
From the chart application:
1. Select Menu.
2. Select Presentation .
3. Select Chart View to switch between 2D or 3D.
2D chart view
The 2D chart view can display a range of information to help
you navigate.
1 2 3
8
9
10
11
12
13
Item Description
1 Range — horizontal chart scale indicator (shown in selected
system units).
2 Waypoint — Inactive.
3
Orientation — states the orientation mode that the chart is
using (North-up, Head-up, or Course-up).
4 Vessel symbol— shows your current position.
5
Navigation origin line — During navigation, shows a solid
line from the starting point to the target waypoint. The starting
point can be the vessel's original location, the point of XTE
reset or the point the current leg of a route was initiated.
6 Motion mode — states the current motion mode (Relative,
True, or Auto Range).
7 Chart type — indicates the type of chart in use — Fish or
Navigation.
8 Find ship icon — used to find and center your vessel on
the chart.
9 Vessel position line — During navigation, shows a dotted line
from the vessel's current position to the target waypoint.
10 Cursor — used to select chart objects and move around the
chart area.
11 Target waypoint — Current target waypoint.
12 Data overlay — used to display data such as depth on the
chart screen.
13 AIS target — a vessel broadcasting AIS information (optional).
14 Range out — select icon to range out (New e Series only).
15 Range in — select icon to range in (New e Series only).
16 Cartographic objects — use the Cartography menu: Menu >
Set-up > Cartography to choose which objects to display.
144
4 5 6
14 15 16
3D chart view
The 3D view can display a range of information to help you
navigate.
1 2
10
11
7
12
Item Description
1 Range — horizontal chart scale indicator (shown in
selected system units).
2 Depth Scale — approximate depth beneath your vessel
(optional).
3 Waypoint — optional.
4 Center-of-view — the white cross indicates the center of
chart view at the water level (optional).
5
Orientation — states the orientation mode that the chart
is using.
D12306-3
6
Cartographic objects — use the Cartography Set-up
menu to choose which objects to display.
7 Rotation — shows in degrees true, how far the on-screen
view has been rotated from your vessel's heading and
the tilt angle of your vessel.
8
North arrow – 3D indication of True North in relation to
the chart view. The north arrow also tilts to indicate pitch
angle.
9 Chart type — indicates the type of chart in use — Fish
or Navigation.
10 Find ship icon — used to find and center your vessel
on the chart.
11 Vessel symbol — your vessel's current position.
12 Data overlay — used to display data such as depth on
the chart screen.
13
Range out — use icon to range out (New e Series only).
14 Range in — use icon to range in (New e Series only).
Manipulating the 3D chart view
From the chart application:
1. With the chart in 3D mode, go to the Adjust Viewing Angle
menu: Menu > Adjust Viewing Angle.
2. Select Adjust: so that Pitch and rotate is highlighted.
3. To adjust the pitch:
i. New c Series or New e Series — Move the Joystick Up
or Down to adjust the pitch
3 4 5 6 7
13 14
New a Series / New c Series / New e Series
8 9
000°T
D12307-2