Chart Context Menu - Raymarine a67 Wi-Fi Installation And Operation Instructions Manual

ii. New a series or New e Series — Swipe your finger up or
down across the screen to adjust the pitch.
4. To adjust the rotation:
i. New c Series or New e Series — Move the Joystick Left
or Right to adjust the rotation
ii. New a Series or New e Series — Swipe your finger left or
right across the screen to adjust the rotation.
Chart application

15.5 Chart context menu

Placing the cursor over an area in the chart application displays
D11755-1
a context menu showing the cursors positional data and menu
items.
The method of selecting a chart object using touch depends
on the Context Menu setting in the chart Set-up menu, which
can be set to Touch or Hold.
The context menu provides the following positional data for the
cursor position in relation to your vessel:
• Latitude
• Longitude
• Range
• Bearing
The following menu items are available:
• Goto Cursor / Stop Goto / Stop Follow
• Place Waypoint
• Photo
• Tide Station (only available if a tide station is selected.)
• Current Station (only available if a current station is selected.)
• Pilot Book (only available at certain ports.)
• Animate (only available if a tide or current station is selected.)
• Chart Objects
• Find Nearest
• Measure
• Build Route
• Acquire Target (only available if Radar overlay is switched
on.)
• Slew thermal camera (only available when thermal camera
is connected and operating.)
Accessing the context menu
You can access the context menu by following the steps below.
1. New e Series or New c Series:
i. Selecting a location, object or target on-screen and
pressing the Ok button.
2. Touchscreen multifunction displays:
i. Selecting an object or target on-screen.
ii. Selecting and holding on a location on-screen.
Selecting context menu settings
On touchscreen multifunction displays you can choose how
chart object context menus are a accessed.
From the chart application:
1. Select Menu.
2. Select Set-up.
3. Select Context Menu to switch between Touch or Hold.
• Hold — requires you to touch and hold on a chart object to
access the context menu.
• Touch — requires you to touch a chart object to access
the context menu.
145