Receiving A Call - Chevrolet 2010 Tahoe Owner's Manual

Using the Call Command
1. Press and hold
responds with Ready followed by a tone.
2. Say Call . The system responds with Call using
<phone name>. Please say the name tag followed
by a tone.
3. Say the name tag of the person to call.
If the system clearly recognizes the name tag it
responds with OK, calling, <name tag> and
dials the number.
If the system is unsure it recognizes the right
name tag, it confirms the name tag followed by
a tone. If the name tag is correct, say Yes .
The system responds with OK, calling, <name
tag> and dials the number. If the name tag is
not correct, say No . The system will ask for
the name tag to be re entered.
Once connected, the person called will be heard
through the audio speakers.
4-124
g
for two seconds. The system
Using the Re dial Command
1. Press and hold
responds with Ready followed by a tone.
2. After the tone, say Re dial . The system responds
with Re dial using <phone name> and dials the
last number called from the connected Bluetooth
phone.
Once connected, the person called will be heard
through the audio speakers.

Receiving a Call

When an incoming call is received, the audio system
mutes and a ring tone is heard in the vehicle.
g
Press and begin speaking to answer the call.
x
Press to ignore a call.
g
for two seconds. The system