Table of Contents
Advertisement
When the vehicle has a flat tire (B), use the following
example as a guide to assist you in the placement of
wheel blocks (A).
A. Wheel Block
B. Flat Tire
The following information explains how to use the jack
and change a tire.
Removing the Spare Tire and Tools
The equipment you will need to change a flat tire is
stored under the storage tray, which is located on the
driver side trim panel (over the rear wheelhouse).
Regular Wheelbase shown, Extended Wheelbase
1. Remove the tray to access the tools by pulling up
on the finger depression under the jack symbol.
similar
6-89
Advertisement
Chapters
Table of Contents
