Receiving A Call; Call Waiting - Chevrolet Malibu 2010 Owner's Manual

Hide thumbs Also See for Malibu 2010:
Table of Contents

Advertisement

3. Say the name tag of the person to call.
If the system clearly recognizes the name tag it
responds with "OK, calling, <name tag>" and
dials the number.
If the system is unsure it recognizes the right
name tag, it confirms the name tag followed
by a tone. If the name tag is correct, say "Yes".
The system responds with "OK, calling,
<name tag>" and dials the number. If the name
tag is not correct, say "No". The system will
ask for the name tag to be re-entered.
Once connected, the person called will be heard
through the audio speakers.
Using the Re-dial Command
b g
1. Press and hold
responds with "Ready" followed by a tone.
2. After the tone, say "Re-dial". The system responds
with "Re-dial using <phone name>" and dials the
last number called from the connected Bluetooth
phone.
Once connected, the person called will be heard
through the audio speakers.
4-80
for two seconds. The system

Receiving a Call

When an incoming call is received, the audio system
mutes and a ring tone is heard in the vehicle.
b g
Press
and begin speaking to answer the call.
c x
Press
to ignore a call.

Call Waiting

Call waiting must be supported on the Bluetooth phone
and enabled by the wireless service carrier to work.
b g
Press
to answer an incoming call when
another call is active. The original call is placed
on hold.
b g
Press
again to return to the original call.
To ignore the incoming call, continue with the
original call with no action.
c x
Press
to disconnect the current call and
switch to the call on hold.

Advertisement

Table of Contents
loading

Table of Contents