Finding A Station - Chevrolet 2010 Tahoe Owner's Manual

Noise Compensation Technology: Vehicles with the
LTZ package and a Bose
®
Bose AudioPilot noise compensation technology.
When turned on, AudioPilot
audio system equalization, to compensate for
background noise, so that music always sounds the
same at the set volume level.
This feature is most effective at lower radio volume
settings where background noise can affect how well
the music is heard. At higher volume settings, where the
music is much louder than the background noise, there
might be little or no adjustments by AudioPilot
To activate:
1. Set the radio volume to the desired level.
2. Press the MENU button to display the radio
setup menu.
3. Press the softkey under the AUTO VOLUM tab on
the radio display.
4. Press the softkey under the ON tab. The display
times out after approximately 10 seconds.
For additional information on AudioPilot
www.bose.com/audiopilot.
4-86
®
Audio System include the
®
continuously adjusts the
®
.
®
, please visit

Finding a Station

BAND: Press to switch between AM, FM, or XM ,
if equipped.
(Tune): Turn to select radio stations.
© ¨
SEEK : Press either SEEK arrow to go to the
previous or to the next station and stay there.
To scan stations, press and hold either arrow for a
few seconds until a beep sounds. The radio goes to a
station, plays for a few seconds, then goes to the next
station. Press either arrow again to stop scanning.
The radio only seeks and scans stations with a strong
signal that are in the selected band.
4
(Information) (XM Satellite Radio Service, MP3, and
RDS Features): For vehicles with XM, MP3, WMA or
4
RDS features, press to display additional text
information related to the current FM-RDS or XM
station; or CD, MP3 or WMA song. If information is
available during XM, CD, MP3 or WMA playback, the
song title information displays on the top line of the
display and artist information displays on the bottom
line. When information is not available, No Info
displays.