Call Waiting; Receiving A Call - Chevrolet 2010 Corvette Convertible Owner's Manual

Using the Re dial Command
1. Press and hold
responds with Ready followed by a tone.
2. After the tone, say Re dial . The system responds
with Re dial using <phone name> and dials the
last number called from the connected Bluetooth
phone.
Once connected, the person called will be heard
through the audio speakers.

Receiving a Call

When an incoming call is received, the audio system
mutes and a ring tone is heard in the vehicle.
Press and begin speaking to answer the call.
Press to ignore a call.
for two seconds. The system

Call Waiting

Call waiting must be supported on the Bluetooth phone
and enabled by the wireless service carrier to work.
Press to answer an incoming call when
another call is active. The original call is placed
on hold.
Press again to return to the original call.
To ignore the incoming call, continue with the
original call with no action.
Press to disconnect the current call and switch
to the call on hold.
Three Way Calling
Three Way Calling must be supported on the Bluetooth
phone and enabled by the wireless service carrier
to work.
1. While on a call press
with Ready followed by a tone.
2. Say Three way call . The system responds with
Three way call, please say dial or call .
3. Use the dial or call command to dial the number of
the third party to be called.
4. Once the call is connected, press
the callers together.
. The system responds
to link all
4-103