Appendix B Safety Instructions; Power Disconnect Device; Rf Safety; Electrostatic Discharge - Motorola FX9500 User Manual

Appendix B Safety Instructions

Power Disconnect Device

The plug on the power supply cord is intended to be the power disconnect device. As a result, the power
source (socket or outlet) shall be located near the equipment and shall be easily accessible.

RF Safety

CAUTION
IMPORTANT

Electrostatic Discharge

CAUTION
FCC Radiation Exposure Statement. The antennas used for this transmitter must be
installed to provide a separation distance of at least 25 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
EU Radiation Exposure Statement. The antennas used for this transmitter must be installed
to provide a separation distance of at least 25 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
Always power down the RFID Reader through the web console before removing an
antenna or load from an RF port.
FX9500 RFID Reader antenna ports may be susceptible to damage from static discharge or
other high voltage. Use proper Electrostatic Discharge (ESD) precautions to avoid static
discharge when handling or making connections to the FX9500 RFID reader antenna or
communication ports. Equipment failure can result if the antenna or communication ports
are subjected to ESD.