Default Rules; Adf Bar Codes - Motorola Symbol DS6707 Product Reference Manual

Note that using the standard data editing functions also creates ADF rules. Scan options are entered as ADF rules,
and the previous hierarchy also applies to them. For the digital imager scanner, this applies to prefix/suffix
programming in the parameter
These rules reside in the same "rule list" as ADF rules, so the order of their creation is also important.

Default Rules

Every unit has a default rule to send all scan data. Units with custom software can have one or more default rules
burned in. The rules hierarchy checks user programmable rules first, then the default rules. Disable default rules by
entering the following general rule in the user programmable buffer:
When receiving scan data, send all data.
Since this rule always applies, ADF never enters the default rules.

ADF Bar Codes

Table 11-1 lists the bar codes available through ADF.
ADF Bar Codes
Table 11-1
Special Commands
Pause Duration
Begin New Rule
Save Rule
Erase
Quit Entering Rules
Disable Rule Set
Criteria
Code Types
Code Lengths
1 Character
7 Characters
14 Characters
21 Characters
28 Characters
Specific String at Start
Specific String, Any Location
Any Message OK
Scan Data Transmission Format on page
Parameter
- 6 Characters
- 13 Characters
- 20 Characters
- 27 Characters
- 30 Characters
Advanced Data Formatting
4-17.
Page
Number
11-8
11-8
11-8
11-8
11-9
11-9
11-10
11-11
11-11
11-18
11-18
11-19
11-20
11-21
11-22
11-23
11-23
11-23
11 - 5