3.4
Configure the Thomson Gateway
Introduction
If your service provider did not preconfigure your Thomson Gateway, you may have to configure the
Thomson Gateway via its Graphical User Interface (GUI).
Requirements
JavaScript must be enabled on your web browser (this is the default setting). For more information, consult
the help of your web browser.
Procedure
Proceed as follows:
1
Open your web browser.
2
The Thomson Gateway informs you that you have not yet configured your Thomson Gateway.
If this window does not appear, browse to
Gateway (by default: 192.168.1.254) and click Thomson Gateway on the menu on the left-hand side.
3
Click Setup my Thomson Gateway.
4
The Easy Setup wizard appears. This wizard will guide you through the configuration of your Thomson
Gateway. Click Next and follow the instructions.
DMS-CTC-20101208-0018 v1.0
http://dsldevice.lan
or to the IP address of your Thomson
Manual Installation
29