THOMSON TG797n Setup And User Manual page 106

Internet Security
7 Enter the following information:

The Name of the firewall rule.

The Source Interface and IP Address (range).
Or you can type a User-defined IP address (range).

The Destination Interface and IP Address (range)
Or you can type a User-defined IP address (range).

The Service type of the traffic; this can be a protocol (DNS, SMTP,...) or a specific Thomson Gateway
system service.
8 Select an Action that should be done on traffic for which the firewall rules applies:

Accept: to allow the traffic to pass

Deny: to drop the traffic (without notification)

Count: to let the traffic pass, but count it (Hits)
9 Click Apply.
98
Use Any as IP address in case all traffic for the interface should be parsed.
Use Any as IP address in case all traffic for the interface should be parsed.
DMS-CTC-20101208-0018 v1.0