Configuring Upnp On The Thomson Gateway - THOMSON TG797n Setup And User Manual

Thomson Gateway Network Services
9.1.3

Configuring UPnP on the Thomson Gateway

Introduction
On the Thomson Gateway GUI
 Enable/Disable
 Enable/Disable
Enable/Disable UPnP
Proceed as follows:
1 Browse to the Technicolor Gateway GUI.
For more information, see
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play:

Select the Use UPnP check box, to enable UPnP.

Clear the Use UPnP check box, to disable UPnP.
4 Click Apply.
Extended Security
If Extended Security is enabled, only limited UPnP operation between the host and the Thomson Gateway is
allowed:
 A local host is not allowed to connect/disconnect the Thomson Gateway Internet connection. You can
then only connect/disconnect the Internet connection via the
 Address translation mappings can only be added or changed via UPnP for the host on which the UPnP
application is running.
Enable/Disable Extended Security
Proceed as follows:
1 Browse to the Technicolor Gateway GUI.
For more information, see
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play, select Use Extended Security.
4 Click Apply.
84
you can:
UPnP.
Extended Security.
"4.1 Technicolor Gateway GUI" on page 50
"4.1 Technicolor Gateway GUI" on page 50
.
Thomson Gateway GUI
.
DMS-CTC-20101208-0018 v1.0