Page Menu - Korg PA800 User Manual

The MEDIA LED will start blinking, while the
personal computer reads the internal SSD-U
memory and the internal hard disk of the Pa800.
When finished (this may take some minutes,
depending on the hard disk size), the icons of the
SSD-U and the hard disk will appear among the
other storage devices connected to the computer:
SSD-U
Windows
Macintosh
Caveat: Do not modify ".SET" folders, or you will
no longer be able to use them on the Pa800. Only
use the USB connection for backup purpose, or to
modify ordinary folders.
Note: After starting the USB connection, accessing
Pa800 data from the computer may take some time,
depending on the size of the hard disk and the data
contained in the SSD-U or hard disk.
Disable Press this button to disconnect the USB file trans-
fer. Be careful to press it only when you are abso-
lutely sure data transfer has been completed.
Note: USB connection is also automatically discon-
nected when disconnecting the USB communica-
tion on the personal computer side.
To disconnect USB communication on a PC, you
usually select the dedicated command by clicking
on the USB device icon with the right mouse but-
ton. On the Mac, select the USB device icon, then
select the Eject command or drag it to the eject
icon in the Dock.
Hint: We suggest to disconnect USB connection
from the personal computer, instead of pressing this
button on the Pa800.
Caveat: Do not disconnect USB communication
before the personal computer has really finished
transferring files. Sometimes, the on-screen indica-
tor tells the procedure has been completed,
BEFORE it is actually finished.
Disconnecting USB communication (or discon-
necting the USB cable) before data transfer has
been completed may cause loss of data.

Page menu

Press the page menu icon to open the menu. Press a command to
select it. Press anywhere in the display to close the menu without
selecting a command.
HD
Create New Folder
This command lets you create a new generic folder in the root of
any device, or inside any other generic folder. You can't create a
".SET" folder with this command, since this type of folder is
reserved to the Save operations (and can be created with the New
SET button in any Save page).
By pressing the
Edit window. Enter the name, then press OK to confirm and
close the Text Edit window.
Rename
Available only when an item is selected in a file list.
Use this function to change the name of an existing generic file
or folder. To preserve consistency through the data structure,
you cannot rename single files inside a ".SET" folder. Also, you
cannot change the 3-character extension of files and ".SET" fold-
ers, since they are used to identify the type of file or folder.
Press the
Enter the new name, then press OK to confirm and close the
Text Edit window.
Media edit mode
Page menu
(Text Edit) button you can open the Text
(Text Edit) button to open the Text Edit window.
237