Main Page - Record 2; Main Page - Cue - Korg PA800 User Manual

112 Style Record mode

Main page - Record 2

Main page - Record 2
While in the main page, press the "Record 2" tab to see this page.
Most parameters in this page are the same as in "Main page -
Record 1". In addition, here you can see and select Sounds for
each Style track.
Sounds area
This area lets you see Sounds and octave transposition for the
eight Style tracks.
Octave transpose icon
Sound bank's icon
Octave transpose icon
Non editable. This indicator shows the track's octave transposi-
tion. Tracks will be recorded with the selected octave transposi-
tion. To change this value, use the UPPER OCTAVE buttons, or
go to the "Mixer/Tuning: Tuning" edit page in the Style Play
mode (see page 92). Save this value to the Style Performance.
Sound bank's icon
This picture illustrates the bank the current Sound belongs to.
Touch an icon a first time to select the corresponding track
(detailed information are shown on the Selected Track Info area,
see the "Record 1" page above). Touch it a second time to open
the Sound Select window.
Note: These Sounds can be replaced by Sounds selected by a Perfor-
mance, provided the "Original Style Sounds" parameter is left
unchecked in Style Play mode (see page 85).

Main page - Cue

While in the main page, press the "Cue" tab to see this page. This
is where you can access to the Cue parameter:
Sounds
area
Cue mode for [Style element]
This parameter lets you decide how the current Style Element
will enter after it has been selected. This setting is only available
for the Fill 1, 2, 3 Style Elements.
Immediate, first measure
Immediate, current measure
Next measure, first measure
The Style Element enters immediately, and begins
from the first measure.
The Style Element enters immediately, and begins
from the current measure.
The Style Element enters at the beginning of the
next measure, and begins from the first measure.