Midi: Midi In Control; Midi: Midi In Channels - Korg PA800 User Manual

204 Global edit mode

MIDI: MIDI In Control

MIDI: MIDI In Control
This page lets you program general parameters for the MIDI IN,
like the Chord Recognition channel and MIDI parameters for
the Voice Processor.
Midi In Controls
Midi In Octave Transpose
Use this parameter to determine if the Octave Transpose is
applied also to notes received on the MIDI IN or USB Device
port.
On Notes received on the MIDI IN or USB Device
port are transposed according to the Octave
Transpose setting for each track.
Off Data received on the MIDI IN or USB Device
port are not transposed.
Midi In Mute/Unmute
Use this parameter to determine if a muted track can still play
data received via MIDI.
On No data received via MIDI on a muted track can
be played by Pa800.
Off Data received via MIDI on a muted track can still
play on the Pa800.
Chord 1 Midi Channel
Chord 2 Midi Channel
Notes entering these channels are sent to the Chord Recognition
engine.
There are two separate Chord channels. This is very useful when
you must send chords to Pa800 on two different channels (like
with some MIDI accordions).
Upper Octave Transp (Transpose)
Octave transposition of data received on the MIDI IN for the
Upper tracks. For example, if you select the +1 value, a received
C4 will play a C5 on the Pa800.
This parameter may be useful to many MIDI accordion players,
whose MIDI interface may transmit on an unexpected octave.
Lower Octave Transp (Transpose)
Octave transposition of data received on the MIDI IN or USB
Device port for the Lower track. For example, if you select the +1
value, a received C4 will play a C5 on the Pa800.
This parameter may be useful to many MIDI accordion players,
whose MIDI interface may transmit on an unexpected octave.
Midi In Velocity Value
Use this parameter to set a fixed velocity (dynamics) value for all
received MIDI notes. This is useful when playing the Pa800 with
an organ or a MIDI Accordion.
Normal Normal velocity values are received.
40...127 All received velocity values are converted to the
selected value.
Voice Processor Midi controls
Midi In Channel
Mid Notes received on this channel are sent to the Harmony section
of the Voice Processor.
Octave Transpose In
Octave transpose for all notes received via MIDI by the Har-
mony section of the Voice Processor.
In Note Range-High
In Note Range-Low
Mid
These parameters are the lowest and highest notes received by
the Harmony section of the Voice Processor. Notes received out
of this range are not recognized.

MIDI: MIDI In Channels

In this page, you can assign Pa800 tracks to any of the MIDI IN
channels.
Mid
Mid
Mid
Channels
You can assign to each channel one of the following tracks:
Off No track assigned.
Lower Lower track.
Upper 1...3 One of the Upper tracks.
Mid
Mid
Mid
Mid
Mid
Mid
Mid