Table of Contents
Advertisement
18
Rear panel
Rear panel
USB
DEVICE
2
4
USB
DEVICE
HOST (R)
2
1
AUDIO OUTPUT
7
1
Music stand holes
A music stand comes standard with your Pa800. Insert its legs
into these two dedicated holes.
2
ACV cable connector
Plug the supplied AC cable into this connector.
3
POWER switch
Use this switch to turn the instrument on or off.
4
USB connectors
DEVICE
This is a USB Type B (Slave/Device) connector,
USB 1.1 compliant (Full Speed). Use it to connect
the Pa800 to a personal computer, and transfer
data to/from its internal devices (SSD, hard disk
if fitted...). See "HD and SSD-U Connection" on
page 236 for more information.
MIDI Over USB is supported, so you can use this
connector instead of the MIDI ports (see "What
is MIDI Over USB?" on page 240).
HOST(R)
This is a USB Type A (Master/Host) connector,
USB 2.0 compliant (High Speed). It duplicates
the USB connector located in the front panel. Use
PEDAL
MIDI
HOST (R)
DAMPER
ASSIGNABLE
EC5
THRU
OUT
IN
1
RIGHT
LEFT
2
GAIN
1
GAIN
VIDEO OUT
AUDIO OUTPUT
AUDIO INPUT
5
PEDAL
DAMPER
ASSIGNABLE
EC5
THRU
RIGHT
LEFT
2
GAIN
AUDIO INPUT
8
1
2 3
This device complies with Part 15 of the FCC Rules.
Tested To Comply
WARNING:
Operation is subject to the following two conditions: (1) This
With FCC Standards
TO REDUCE THE RISK OF FIRE
device may not cause harmful interference, and (2) this
FOR HOME OR OFFICE USE
OR ELECTRIC SHOCK DO NOT
device must accept any interference received, including
EXPOSE THIS PRODUCT TO
interference that may cause undesired operation.
RAIN OR MOISTURE.
Complies with Canadian ICES-003 Class B.
Conforme au Règlement Canadien NMB-003 Classe B.
6
MIDI
OUT
IN
1
GAIN
it to connect to the Pa800 an USB Flash Memory
stick, an external CD-ROM drive, an USB hard
disk. To access the connected device, go to the
Media edit mode (see "Media edit mode" on
page 222).
5
PEDAL connectors
These connectors allow for connection of external pedals.
DAMPER
Use this to connect a Damper pedal, like the Korg
PS1 or DS1H. To change its polarity, see
"Damper Polarity" on page 202.
ASSIGNABLE Use this port to connect a continuous- or foot-
switch-type pedal, like the Korg EXP2 or XVP10.
To program it, see "Pedal/Footswitch" on
page 202.
EC5
This connects to a Korg EC5 multiswitch, to con-
trol many functions in realtime. To program the
EC5, see "EC5-A...E" on page 202.
6
MIDI INTERFACE
The MIDI interface allows your Pa800 to be connected to exter-
nal controllers (master keyboard, MIDI guitar, wind controller,
MIDI accordion...), to a series of expanders, or to a computer
9
VIDEO OUT
Advertisement
Table of Contents
