Table of Contents
Advertisement
230
Media edit mode
Save
1.
If saving to an external device, connect the device to one of
the USB Host ports.
2.
The full content ("All") of the internal memory is already
shown. Select it, and press Open to open it. A list of User
data types appear (each type is a separate folder).
3.
Select the folder containing the type of data you wish to
save, and press Open to open it. The list of contained banks
is shown.
4.
Select the bank to be saved, and press Save To to confirm
the selection. The list of files of the target device is shown.
5.
If needed, select a different target device, by using the
Device pop-up menu. When the target device is selected, its
content will appear in the display.
6.
At this point, you can:
• Press the New SET button and create a new ".SET" folder
(see "Creating a new ".SET" folder" on page 231), or
• Select an existing ".SET" folder, and press Save to confirm.
7.
A dialog box appears, asking you to select one of the avail-
able User (or Favorite Style) locations inside the folder:
In the above dialog box, the previously selected bank of
Styles will be saved to the bank User 01 (corresponding to
the USER1 button) inside the selected folder. Three User
banks are available.
8.
Press OK to confirm, or Cancel to abort.
Warning: After confirming, the same bank in the target folder
is deleted.
Saving a single item
You can save a single User item with a single operation.
1.
If saving to an external device, connect the device to one of
the USB Host ports.
2.
The full content ("All") of the internal memory is already
shown. Select it, and press Open to open it. A list of User
data types appear (each type is a separate folder).
3.
Select the folder containing the type of data you wish to
save, and press Open to open it. The list of contained banks
is shown.
Advertisement
Table of Contents
