212
Voice Processor
Accessing the Voice Processor edit pages
Voice Processor
The Voice Processor applies effects and three-part harmony to
your voice. Some dedicated controllers on the control panel
allows you to quickly access the most often used functions:
•
MIC On/Off button
•
MIC volume slider
•
MIC FX slider
•
HARMONY on/off button
•
EFFECT on/off button
In addition, you can edit the Voice Processor Setups (general set-
tings for the singer's voice) and Presets (programming of various
effects and harmony styles) in the dedicated pages of the Global
edit mode, described in this chapter.
Accessing the Voice Processor edit pages
While in the Global edit mode, press the MENU button to access
the edit section menu:
When this page appears, touch either the Voice Processor Setup
or the Voice Processor Preset item to access the relevant edit
pages.
An alternative way to access these pages is to keep the SHIFT
button pressed, and press either the MIC (Setup page), HAR-
MONY (Preset page) or EFFECT (Effects page) button on the
control panel.
Voice Processor Setup: Setup
In this page you can select a Voice Processor Setup, and set some
general parameters for the current Setup.
Setup
Voice Processor Setup
Use this parameter to select a Voice Processor Setup.
Setup parameters are global and do not change when a different
preset is recalled. Setup parameters are all the parameters found
in the Voice Processor Setup edit section, including Lead voice
input level and pan, Compression/Gate, and EQ parameters
among many others.
They are parameters that would typically be set for a given situa-
tion based on the singer, microphone or studio configuration
and then left that way as a basis for the presets within the Voice
Processor. If you change your microphone (or singer!) the EQ/
Compression settings need to only be adjusted once in the setup
section.
If you wish to save your setup settings, just select the "Write Glo-
bal-Voice Processor Setup" command from the page menu (see
page 211).
Harmony Settings
This parameter is a general setting for the Harmony section
voices, that is saved in the Voice Processor Setup. It will not
change when a different Preset is selected.
Pitch Bend Range
Only available in Notes mode. Sets the range (in semitones) that
MIDI pitch bend information will alter the pitch of the harmo-
nies in Notes mode.
Pan/Volume
Pan knob
Adjusts panning for the Lead voice. L64 (panned fully left) to
R63 (panned fully right).
VPs
VPs