Mixer/Tuning: Fx Send - Korg PA800 User Manual

152 Song Play operating mode

Mixer/Tuning: FX Send

Use the TRACK SELECT button to switch from the Keyboard to
the Song tracks, and vice versa.
Upper Volume Link
This parameter allows you to define if changing the volume for
one of the Upper tracks, proportionally changes also the volume
for the other Upper tracks.
To save this parameter status, go to the Style Play mode, then
select the Write Global-Style Play Setup from the page menu (see
"Write Global-Style Play Setup dialog box" on page 105).
Note: This parameter is the same you can find in the "Preferences:
Global Setup" page of the Style Play mode (see page 102).
On When changing volume to one of the Upper
tracks, volume for the other Upper tracks
changes in proportion.
Off When changing volume to one of the Upper
tracks, only that track's volume is changed. Other
Upper tracks are left unchanged.
Pan
Track position in the stereo field.
-64...-1 Left stereo channel.
0 Center.
+1...+63 Right stereo channel.
Off If the track's output status is Left&Right (normal
setting), the direct (uneffected) signal is not sent
to the outputs; only the FX signal is heard for this
track.
If the track is sent to a separate output, no FX is
sent to any output.
To program the output status for each track, see
"Audio Output: Seq1" and "Audio Output: Seq2"
on page 206.
Volume
Track's volume.
0...127 MIDI value of the track's volume.
Play/Mute icon
Track's play/mute status. See "Keyboard track status" on
page 145 for more information.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Mixer/Tuning: FX Send
This page lets you set the level of the track's direct (uneffected)
signal going to the Internal FX processors.
Note: Song parameters cannot be saved when saving to a Perfor-
mance or STS.
The effect processors included in Pa800 are connected in paral-
lel, so you can decide which percentage of the direct signal can
be effected:
Track
Sty
In case you want to send all of a track's signal to the effect (as
when using "insert" effects, like Rotary, Distortion, EQ...), just
set the Pan to Off (see "Pan" above):
Track
There are four Internal FX processors in Song Play mode. Usu-
ally, they are arranged as follows:
FX A Reverb processor for Sequencer 1 and 2.
FX B Modulating FX processor for Sequencer 1 and 2.
FX C Reverb processor for Keyboard tracks.
FX D Modulating FX processor for Keyboard tracks.
Depending on the status of the "Seq.2 FX Mode" parameter,
Sequencer 2 might use the C/D effect pair (see page 159).
Furthermore, in Sequencer mode you can create Songs using all
four effects (see "Effects: FX Select" on page 185).
Out L/R
FX Processor
Out L/R
FX Processor
Sng