Rear Panel - Korg C-900 Owner's Manual

1. Controls and basic operation

Rear panel

7 1
AUX IN
L R
Audio equipment
1. OUTPUT
External equipment such as your stereo or key-
board mixer can be connected here to listen to the
sound of the C-900 through these devices.
For stereo connections, the left and right signals
will be output from the L/MONO jack and the R
jack. For mono connections, use the L/MONO jack.
Use the master volume to adjust the level.
2. INPUT
Signals from an external device such as a tone gen-
erator module, cassette recorder, or CD player can
be input to the C-900, and heard through the
C-900's built-in speakers, headphones, or an audio
system connected to the external outputs.
For stereo connections, use the L/MONO and R
jacks. For mono connections, use the L/MONO
jack.
The volume of the external device connected to
the INPUT jacks can be adjusted by the volume
control of the external device.
3. ASSIGN PDL/SW (Assign pedal/switch)
A separately sold Korg XVP-10 or EXP-2 pedal
controller or PS-1 foot switch can be connected
here. The function of these pedals can be specified
by settings in Disk/Global mode.
☞Reference Guide p.63
4
2 3 4
EC5
OUTPUT
L R
MIDI tone generator module
(synthesizer)
6 5
MIDI cable
MIDI IN
4. EC5
A separately sold Korg EC5 external controller can
be connected here. In Disk/Global mode, you can
assign a different function to each of the five
switches of the EC5. ☞Reference Guide p.64
5. MIDI
These connectors are used to exchange data with
other MIDI devices such as keyboards and com-
puters. In order to make these connections, you
will need separately sold MIDI cables. MIDI IN
receives MIDI messages from other devices. MIDI
OUT transmits MIDI messages to other devices.
☞ p.61 "8. MIDI Applications"
6. TO HOST
This interface connector allows the C-900 to be
directly connected to a computer which does not
have a MIDI interface. To make this connection,
you will need a separately sold connection cable
that is compatible with your computer. ☞p.63 "9.
Connections with a computer"
7. PEDAL
Insert the pedal connector of the ST-900 stand
here.
MIDI OUT
MIDI keyboard