Rear Panel - Korg SV-2 User Manual

Rear panel

The back panel is where you can find most of the connections.
3 4
1 AC IN POWER connector
Connect the included IEC power cable here.
2 MUSIC STAND holes
A music stand comes standard with your SV­2. Insert its legs into these two
dedicated holes.
3 USB DEVICE connector
Use this connector to connect a computer for sequencing (this doubles the
MIDI ports), or for using the SV­2 Editor software for fine editing. Before
using this connector, please install on your Windows PC the KORG USB­MIDI
Driver (the relevant instructions are provided together with the MIDI Driver,
that can be downloaded from our
4 SPEAKERS ON/OFF switch (only models with integrated speakers)
Use this switch to turn the integrated speakers on or off.
5 PEDAL jacks (DAMPER, 1, 2)
Connect the supplied KORG DS­2H pedal, or the optional DS­1H, to the
DAMPER jack. This jack always operates as a damper pedal.
1
5
Controls and connections |11
2
6 7
web site).
8