Removing And Replacing The Flip Hinge Assembly - Motorola V6 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Flip Hinge Assembly

G
G
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1. Remove the battery cover, battery, SIM, rear housing, antenna, transceiver board assembly,
flip assembly cover, and camera assembly, as described in the procedures.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2. Remove the T3 screw used to secure the hinge.
3. Remove the two T6 screws used for securing the flip hinge bracket and the third screw in
the flip inner that is used to lock the hinge in place.
Figure 16. Removing the Flip Hinge Assembly Screws
October 26, 2006
Disassembly
061430o
25