Removing And Replacing The Subscriber Identity Module (Sim); Removing And Replacing The Rear Housing - Motorola V6 Service Manual

Disassembly

Removing and Replacing the Subscriber Identity Module (SIM)

Removing and Replacing the Rear Housing

G
G
14
1. Remove the battery door and battery as described in the procedures.
Figure 3. Removing the SIM
2. Slide the SIM away from the SIM holder, as shown in Figure 3.
3. Carefully lift the SIM from the phone.
4. To replace, insert the SIM into the holder, ensuring the keyed corner of the SIM faces the
outward edge of the phone.
5. Replace the battery and battery door as described in the procedures.
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1. Remove the battery cover, battery, and SIM as described in the procedures.
2. Using a Torx driver with a T-6 bit, remove the screws at each side of the phone. Retain the
screws for reassembly.
In addition to 2 screws, the rear chassis assembly is fastened with plastic catches.
These are fragile and should be released with care.
October 26, 2006
6809505A64-O
031829o