Motorola V6 Service Manual page 19

Level 1 and 2 Service Manual
Figure 4. Removing the Rear Housing Screws
3. Release the seven housing latches by inserting the pointed end of the plastic disassembly
tool into the openings on the rear housing.
Figure 5. Removing the Rear Housing Latches
4. Carefully remove the rear housing away from the front housing and flip assembly.
5. Lift the rear housing assembly away from the phone.
6. To replace, align the housing latches with the corresponding openings on the front housing.
Gently press the housings together until the catches snap into place.
7. Replace the 2 housing screws and tighten to a final torque setting of 1.7 inch pounds. Do
not over tighten.
8. Replace the antenna, SIM, battery, and battery cover as described in the procedures.
October 26, 2006
Disassembly
040701o
040701o
15