Level 1 and 2 Service Manual
Removing and Replacing the Display Module Assembly
G
G
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1.
Remove the battery cover, battery, SIM, rear housing, antenna, transceiver board assembly,
flip assembly cover, and camera assembly, as described in the procedures.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
Figure 11. Removing and Replacing the Display Module Assembly
October 26, 2006
Disassembly
061430o
21