Table of Contents
Advertisement
Level 2 Service Manual
Removing and Replacing the Flip Assembly
G
6809507A01-O
1.
Remove the battery cover, battery, antenna, transceiver board, and keypad as
described in the procedures.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2.
Disengage the flip hinge from the front housing by pushing the hinge in the
direction of the arrow with a small screwdriver.
Flip Assembly
Figure 12. Disengaging the Flip Hinge.
October 02, 2006
Front Housing
Flip Flex
Screwdriver
Disassembly
050862o
27
Advertisement
Table of Contents
