Using The Bridging Option - Ubee DVW326 User Manual

Ubee Interactive
CWmin
CWmax
AIFSN
TXOP (b) Limit (usec)
TXOP (a/g) Limit (usec)
Discard Oldest First
EDCA STA Parameters
WMM TXOP Parameters
Short Retry Limit
Short Fallbk Limit
Long Retry Limit
Long Fallbk Limit
Max Rate in 500kbps
Apply
9.6

Using the Bridging Option

Use the Bridging option to configure the DVW326 to act as a wireless network bridge and
establish wireless links with other wireless access points. To establish a bridge, you need
to know the MAC address of the peer device. The peer device must be in wireless
bridging mode as well. The DVW326 can establish up to four wireless links with other
wireless access points. When wireless devices are in wireless bridging mode, they form a
wireless distribution system that allows computers in one LAN to connect to the
computers in the other LAN.
Caution
Avoid bridge loops when you enable bridging devices. Bridge loops cause broadcast traffic to
circle the network endlessly. This can degrade throughput and disrupt communications.
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide • March 2014
Sets the time for the following fields:

CWmin – Contention window minimum

CWmax – Contention window maximum

AIFS – Arbitration inter-frame space

TXOP – Transmit opportunity

Discard Oldest First – Removes oldest frame when set to
On.
Allows you to prioritize wireless network traffic for receiving
terminals. Access categories are:

AC_BE – Best Effort, medium throughput and delay. Most
traditional IP data is sent to this queue.

AC_BK – Background, high throughput. Bulk data that
requires maximum throughput and is not time-sensitive is
sent to this queue (for example, FTP data).

AC_VI – Video

AC_VO – Voice
Allows you to prioritize wireless network traffic for wireless
multimedia transmit opportunities. Access categories are:

AC_BE – Best Effort, medium throughput and delay. Most
traditional IP data is sent to this queue.

AC_BK – Background, high throughput. Bulk data that
requires maximum throughput and is not time-sensitive is
sent to this queue (for example, FTP data).

AC_VI – Video

AC_VO – Voice
Defines how many times the MAC retries to send different types
of packets. If the number of retries reach their limit, the frame is
discarded.
Saves all changes.

Using the Bridging Option

82