Using The Ping Option - Ubee DVW326 User Manual

Ubee Interactive
4.4.1

Using the Ping Option

Use the Ping utility to test network connectivity between devices by sending a test
message to a specific device. You can also confirm the size of data sent is the same as
the size of data received.
Steps
To test connectivity between devices:
1. Click Status from main menu.
1. Click Diagnostics from the left side menu.
2. Choose Ping from the Utility drop-down menu.
3. Enter new parameter values or accept the default values.
4. Click Start Test. Field descriptions are listed below the screen example.
Utility
Ping Test Parameters
Target
Ping Size
No. of Pings
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide • March 2014
Label
Provides a drop-down menu to choose Ping or Traceroute.
Defines the IP address to which you want to send a ping.
Defines the packet size (bytes of data) to send for the ping
operation. Default is 64.
Defines the number of ping commands to send to the ping
target. Default is 3 pings.
Using the Diagnostics Option
Description
26