Using The Bridging Option - Ubee DDW365 User Manual

Ubee Interactive
EDCA AP Parameters
CWmin
CWmax
AIFSN
TXOP (b) Limit (usec)
TXOP (a/g) Limit (usec)
Discard Oldest First
EDCA STA Parameters
WMM TXOP Parameters
Short Retry Limit
Short Fallbk Limit
Long Retry Limit
Long Fallbk Limit
Max Rate in 500kbps
Apply
9.6

Using the Bridging Option

Use the Bridging option to configure the DDW365 to act as a wireless network bridge
and establish wireless links with other wireless access points. To establish a bridge, you
need to know the MAC address of the peer device, that must be in wireless bridging mode
as well. The DDW365 can establish up to four wireless links with other wireless access
points. When wireless devices are in wireless bridging mode, they form a wireless
distribution system that allows computers in one LAN to connect to the computers in the
other LAN.
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014
Allows you to prioritize wireless network traffic. Enhanced
Distributed Channel Access – Access Point (EDCA-AP)
provides four access categories (ACs):

AC_BE – Best Effort, medium throughput and delay. Most
traditional IP data is sent to this queue.

AC_BK – Background, high throughput. Bulk data that
requires maximum throughput and is not time-sensitive is
sent to this queue (for example, FTP data).

AC_VI – Video

AC_VO – Voice
Sets the time for the following fields:

CWmin – Contention window minimum

CWmax – Contention window maximum

AIFS – Arbitration inter-frame space

TXOP – Transmit opportunity

Discard Oldest First – Removes oldest frame when set to
On.
Allows you to prioritize wireless network traffic for receiving
terminals. Access categories are:

AC_BE – Best Effort, medium throughput and delay. Most
traditional IP data is sent to this queue.

AC_BK – Background, high throughput. Bulk data that
requires maximum throughput and is not time-sensitive is
sent to this queue (for example, FTP data).

AC_VI – Video

AC_VO – Voice
Allows you to prioritize wireless network traffic for wireless
multimedia transmit opportunities. Access categories are:

AC_BE – Best Effort, medium throughput and delay. Most
traditional IP data is sent to this queue.

AC_BK – Background, high throughput. Bulk data that
requires maximum throughput and is not time-sensitive is
sent to this queue (for example, FTP data).

AC_VI – Video

AC_VO – Voice
Defines how many times the MAC retries to send different types
of packets. If the number of retries reach their limit, the frame is
discarded.
Saves all changes.

Using the Bridging Option

80